Top Headphone Amplifiers
We’ve spent hundreds of hours researching and comparing Top Headphone Amplifiers of all specifications to find the best one for any need (or budget). Here are the results.
The Best Top Headphone Amplifiers of 2020 – Top Rated & Reviewed
2,827 Reviews Scanned
- Frequency response - 10Hz-20kHz and Impedance - 60 Ohms
- The high-current output allows it to drive headphones with a wide range of impedances, from 16 ohms to 600 ohms.
- The RCA line outputs allow you to send the output to a stereo amplifier or powered speakers
- Frequency response - 20Hz - 20kHz
- The worlds most linear amp technology: the THX achromatic audio amplifire (THX AAA) ensures the ultimate no-compromise Headphone audio experience
- True balanced operation: Each THX stereo amp module operates in a bridged configuration to maximize output power for each channel, each DAC operates in mono mode
- Dual AKM 4493 DACs: new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a direct stream digital input of 2. 8/5. 6/11. 2 MHz
- Balanced & single ended Headphone output: Compatible with all headphones and items
- Tailor your sound: Use the powerful digital tools to tailor the sound to your personal preference. Does your headphone have a little sibilance? Set a peq to tame that frequency peak
- SUPERIOR ENGINEERING - Extremely low distortion and noise from a circuit design inspired by our flagship headphone amp which uses a dedicated input stage that level matches to your source, allowing the signal to flow freely through the Class A output stage, literally music to your ears
- POWER REALIZED - Maximize the performance of your headphones, more than just getting loud, but realizing the full dynamic range of the drivers and experiencing soft vocals as well as heart pounding drums, never missing a beat. Delivers up to 1600mW of power at 16 ohms
- IMMERSIVE SOUND - Enhanced with our signature analog signal processing to deliver accurate and more natural bass frequencies through XBass, and to present a wider soundstage that brings the music out in front of you through our 3D matrix which replicates speaker listening without the cumbersome setup
- THE INS AND OUTS - Features both a balanced 4.4mm pentacon and a single ended 6.3mm (1/4”) headphone output on the front as well as three inputs on the back, including a 3.5mm line out, RCA left and right sockets, and a 4.4mm balanced pentacon connector. Additionally there is a 4.4 balanced output to connect to a power amplifier or active speakers for use as a preamplifier
- LAUNCH EDITION - Discover every detail in each track as background noise disappears with the super quiet iPower 5V DC power adapter, which uses proprietary Active Noise Cancellation technology to lower the noise floor up to 40dB!
- Low and high inputs
- 12aX7 tube output
- Drives headphones from 16-2k ohms
- Zero feedback Class-A all tube headphone amplifier
- Extremely detailed rich bold sound
- Adopting innovative circuit design, DC 5-20V wide input working voltage, the amplifier circuit can always work at a high voltage of 26V, and the background noise index is excellent. With wide frequency response extension, excellent transient response, excellent purity and transparency, and good dynamic range.
- Adopting original TI-NE5532 classical op amp and transistor expanding current circuit, using 1300mA large current output transistor working in class A status, with ultra-low distortion, and the sound is warm and delicate, full and mellow.
- Pluggable op amp socket design, convenient to upgrade different op amps and bring much DIY fun and playability for audiophiles. Smooth and mellow sound, suitable for listening to vocals or string music, classic or pop music, and even with unique charm when playing rock.
- Mini size with exquisite appearance and most cost-effective, brings big surprise for all audiophiles, easily to drive most headphones in the market, providing larger power, better sound field and details, very suitable for home/office desltop audio system use.
- With strong drive power, easily to drive most high-impedance headphones such as: HD580/HD600/HD650/K701/K702/Q701/DT880/T70/T90/SR225/SR325/RS1e
- Share a single stereo source with up to 4 pairs of headphones
- Individual level control for each output
- Powered via the included 12V AC adapter
- Built-like-a-tank construction
- THE WORLD’S MOST LINEAR AMPLIFIER — Announced at CES 2018, the Drop + THX Achromatic Audio Amplifier (THX AAA) 789 is a linear bipolar amplifier with feed-forward error correction
- FATIGUE-FREE LISTENING — Made in collaboration with THX Ltd. , it features the company’s groundbreaking THX AAA and feed-forward topology, which reduce distortion by 20 to 40 dB for realistic, fatigue-free listening.
- THX AAA TECHNOLOGY — Capable of driving any headphones, including high-impedance, high-current, and high-sensitivity types, the THX AAA 789 amp transmits the original audio in its purest possible form.
- ADDITIONAL FEATURES — Each channel of the THX AAA 789 amp is equipped with a low-bias class-AB main amplifier and an auxiliary error-correction amplifier, the former providing the majority of the power and the latter providing a realtime low-power error-correction signal.
- Power supply: AAA batteries x 2 (Best with Polaroid AAA batteries)
- Connections: headphone out, aux in
- Dimensions: W x D x H) 3.39 x 3.15 x 1.22" 86 x 80 x 31mm)
- Full balanced + SE headphone output---A90 has three output headphone jacks of 4-pin-XLR，4.4 balanced and 6.35 SE to meet different usages.
- A90 is provided with a wide range of adaptation to headphones.---The SE 25Vpp / balanced 49Vpp high output voltage along with high output current & less than 0.1 Ohm output impedance,
- A90 is equipped with three gain settings of -9.5dB/ 0dB / 9.5dB for SE and -35dB / 6.0dB / 15.5dB for balanced. The noise of merely 0. 2uVrms makes A90 easily adapt to all types of headphones from extremely sensitive IEMs to most power demanding full sized over-ears.
- It's a great companion of active monitors stacked with D90 DAC when A90 work as pre-amp application.
- DAC + Pre-amp appplication
- Digital to Analog Audio Converter, It Converts Optical SPDIF Toslink coaxial to analog stereo L/R RCA 6.35mm Jack Audio. Converter uses the top digital receiver chip DIR9001, it can receive 24bit/192kHz signals at the highest. (Only Support 2.0 Channel, Not for 5.1 Channel, Please Set The Audio Output to PCM or LPCM.)
- Supports Volume Adjustment, Allowing You to Drive Your Headphone Directly and Adjust the Output Volume. A similar amp function, can provide better sound quality.
- HiFi Headphone Amplifier, Supports most headphones of high impedance 16-300Ω, signal-to-noise ratio> 100Db, THD + N = 0.0003%, fully filter noise, enjoy high-quality audio.
- Wide Compatibility & Plug and Play, No Need for Any Software and Drives, Suitable for HDTV PS3 XBox PS4 Sky HD DVD Blu-ray Home Cinema Systems AV Amps.( Come with a 3ft/1m OD 4.0 Toslink Cable and 6.35mm to 3.5mm audio adaptor)
- Optical Coaxial Switcher, The design of coaxial and optical toggle switch enables this decoder to connect multiple devices Simultaneously. Also you can turn off the product after use by ON/ OFF switch.
Top Rated Top Headphone Amplifiers to Buy Now
Why You Should Buy Best Top Headphone Amplifiers from Amazon
Amazon is not the only store that sell Top Headphone Amplifiers. However, there are several compelling reasons why you should buy Top Headphone Amplifiers from them, with the suitable Price and Reviews. Here are five:
(1) Amazon Makes Shopping Top Headphone Amplifiers Personal
Amazon is very good at making recommendations of Top Headphone Amplifiers based on your search history. From time to time, they will even show you discounted prices on Top Headphone Amplifiers that you previously expressed an interest in. They also make your shopping experience a little easier by showing you items that you recently viewed.
(2) Amazon Checkout is Easy
Amazon checkout is easy, especially if you already have an account. You can add Top Headphone Amplifiers to your cart and go through a multi-step checkout process, or you can buy Top Headphone Amplifiers with only one click by using your stored credit card information.
(3) Amazon Has Lots of Social Proof
Before you make a purchase for Top Headphone Amplifiers, you want to know that the company you are dealing with is legitimate and that others trust the company enough to make a purchase. You may also like to read what others are saying about the product in the review section. Amazon does all of this quite well.
(4) Amazon Has Great Top Headphone Amplifiers Images and Descriptions
In addition to still images, many of Amazon’s Top Headphone Amplifiers have videos. This makes it easier for you to see exactly what you are purchasing. Amazon’s Top Headphone Amplifiers descriptions are also quite good. In many cases, Amazon repeats the descriptions furnished by the manufacturer. In other cases, they write their own.
(5) The Amazon Site is Easy to Navigate
Navigating the Amazon site is easy. Even though the site is huge, you will not feel overwhelmed when searching for Top Headphone Amplifiers. This is partly due to Amazon’s filtering process. You can search for items by brand, price or user rating. You can also search for specific features.
How to Choose the Best Top Headphone Amplifiers (with Price and Reviews)
Although most Top Headphone Amplifiers are similar, there are several differences worth noting. Here are nine criteria to consider when choosing an Top Headphone Amplifiers:
(1) Top Headphone Amplifiers Price and Reviews
Although price is not the only factor to consider, it is nevertheless extremely important. The price of an Top Headphone Amplifiers should be in line with its value. You can compare Top Headphone Amplifiers reviews to make sure you are getting a fair price. This is easy to do on Amazon.
The demand for a particular Top Headphone Amplifiers is a good indication of its ability to perform the functions for which it was designed. If a product has been around for a while and still has a high demand, it is likely a good product.
Top Headphone Amplifiers materials differ from manufacturer to manufacturer. Consider where and how you will be using your Top Headphone Amplifiers to determine if one material would be better than another.
Like most products, Top Headphone Amplifierss come in various sizes. Do you need a large Top Headphone Amplifiersor a small one? Think about where you will use your Top Headphone Amplifiers in order to determine the best size. You can also read the customer reviews on Amazon to see what others are saying about the size of the unit they purchased.
Top Headphone Amplifierss also come in a variety of colors. Do you need a particular color? You should also consider whether the color of your Top Headphone Amplifiers would have any effect on the efficiency of its operation.
The durability of an Top Headphone Amplifiers will be contingent on the materials used as well as the quality of the manufacturing process. Additionally, the type of Top Headphone Amplifiers you purchase may affect its durability.
Will you need to store your Top Headphone Amplifiers? If so, you should consider the size and weight of the Top Headphone Amplifiersto make sure that it can be stored properly. Also, give some consideration to the type of climate in which your Top Headphone Amplifiers will be stored.
(8) Customer Ratings
Customer rating is one of the best criteria for choosing an Top Headphone Amplifiers. It is hard to know exactly how an Top Headphone Amplifiers will perform until you get it home and try it out.
Make sure the Top Headphone Amplifiers you are considering is backed by a good manufacturer’s warranty. If it isn’t, you might be better off with another ones.